| Sign In | Join Free | My burrillandco.com |
|
Shenzhen ECER Network Technology Co., Ltd.
Verified Supplier
1 Years
| Sign In | Join Free | My burrillandco.com |
|
1 Years
| Ask Lasest Price | |
| Delivery Time : | 3-4 weeks |
| Brand Name : | 9CN5116AEFA |
| Model Number : | 9CN5116AEFA |
Product Name: DC POWER JACK
Model No: 9CN5116AE-X-A
Description: Submerged DC Power Jack, 3.6mm DIP plug-in type.
Rating: DC 30V 10A
Operating Temperature Range: -16C to +65C
Application: Suitable for various electronic devices requiring a DC power input.
SAMZO PARTS
China
N/A
N/A
9CN5116AE-X-A
N/A
N/A
N/A
20200224-7001
| Item | Test Conditions | Performance | Specification |
|---|---|---|---|
| 3.1 CONTACT RESISTANCE | Measured at small current (100mA or less) 1000Hz | ≤0.03Ω | |
| 3.2 INSULATION RESISTANCE | Apply a voltage of 500V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | ≥100MΩ | |
| 3.3 DIELECTRIC STRENGTH | AC 500V rms(50~60Hz) for 1 min Trip current:0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Without damage to parts arcing or breakdown etc | |
| 4.1 SOLDERA- BILITY TEST | The top of the terminals shall be dipped 1mm in the solder bath of 240±5°C for 3±0.5 seconds | (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% | |
| 4.2 RESISTANCE TO SOLDERING HEAT TEST | Soldering iron method: Bit temperature 330±5°C Application time of soldering iron 3±0.5 sec. However excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| 4.3 HUMIDITY TEST | The jack shall be stored at a temperature of 40±2°C and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.4 HEAT TEST | The jack shall be stored at a temperature of 70±2°C for 96 hours, and then it shall be subjected to the controlled recovery measurement. | N/A | |
| 4.5 COLD TEST | The jack shall be stored at a temperature of -25±3°C for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.6 LIFE TEST (Without Load) | Connection and disconnection shall be made with the mating plugs and jacks for 5,000 cycles at a speed of 10 to 25 cycles/min. | () | N/A |
| 4.6 LIFE TEST (Load) | Load: At rating condition (Non-inductive load). Connection and disconnection shall be made 1,000 cycles at a speed 10 to 20 cycles / min. | () | (1) Contact resistance shall be ≤0.1Ω (2) Disconnection force shall be 3 to 20N (3) Mechanical and electrical characteristics shall be satisfied. |
| 4.7 TEMPARATURE CYCLING TEST | The jack shall be subjected to 5 cycles of the following conditions. Temp(C): 60 (2h), -40 (4h). Then shall be returned to room ambient condition for 30 minutes. | Product cannot deform or crack. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30mΩ. Insulation Resistance: Min.100 MΩ. Dielectric Withstanding Voltage: 500VAC/min (Between terminals). | |
| 4.8 HEAT SHOCK TEST | The jack shall be subjected to 6 cycles of the following conditions. Temp (C): 60 (1h), -10 (2h). Then shall be returned to room ambient condition for 30 minutes. | Product cannot deform or crack. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30mΩ. Insulation Resistance: Min.100 MΩ. Dielectric Withstanding Voltage: 500VAC/min (Between terminals). | |
| MECHANICAL (Mechanical Properties) | CONNECTION FORCE (): Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 3~20N | |
| MECHANICAL (Mechanical Properties) | DISCONNECTION FORCE (): Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 3~20N | |
| MECHANICAL (Mechanical Properties) | TERMINAL STRENGTH (): A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. | There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. |
| Item | Test Conditions | Performance | Specification |
|---|---|---|---|
| Standard Atmospheric Conditions | (1) Temperature: 5°C to 35°C (2) Humidity: 45% to 85% (3) Pressure: 86 Kpa to 106 Kpa | In the absence of specification, the test temperature, humidity, and pressure are as follows: |
| Item | Quantity | Material | Surface Treatment |
|---|---|---|---|
| Static Contact Piece | 1 | Phosphor Copper | Silver Plated |
| Moving Contact Piece | 1 | Brass | Silver Plated |
| Locking Piece | 1 | Brass | Silver Plated |
| Shielding | 1 | Brass | Silver Plated |
| Socket Base | 1 | PPA | N/A |
| Housing | 1 | N/A | Black |
| Model No. | Part No. | Drawing No. | Main Technical Performance |
|---|---|---|---|
| 9CN5116AE-X-A | 9CN5116-P0933 | 9CN510044B | 1. Rated electrical load: 30V 10A 2. Contact resistance: ≤0.03Ω 3. Insulation resistance: ≥100MΩ 4. Withstand voltage: AC500V (50Hz)/min 5. Insertion and extraction force: 3 - 20N 6. Service life: 5000 times |
|
|
